The previous post showed the hardware for uncoupling wagons using Kadee couplers. This video is about how to uncouple automatically in Traincontroller.
It’s just a little sequence of events that needs to take place and that is programmed in a macro. The macro can be called from e.g. a push button or from the ‘finish operations’ of a schedule. The macro contains the following steps:
1 reverse driving direction
2 set speed at a low value
3 delay the amount of seconds needed to move the couplers to the magnet
4 stop
5 reverse direction
6 set speed at a low value
7 delay the amount of seconds to drive the loc away a bit
8 stop
…
Great website – my gratulations! And a lot of really valuable stuff. Regarding uncoupling with Kadee, i made some enhancements: It is possible to use the function controls Fx – Fy to do the uncoupling at a specific point per block. I have to apologize that the description is in German language but the file is of general purpose – feel free to take a look at it http://www.tc-wiki.de/index.php?title=Ansteuerung_Entkupplungsgleis_via_Lokfunktion&oldid=4277
LikeLike
hello Rudy…could you do a movie on train controller and a turntable having a small problem .thanks you have helped me out greatly
LikeLike
I’ll see what I can do. Of course can only do one on a turntable without a problem. 🙂
LikeLike
hi Rudy jest a basic run down would be amazing I have the wathers turntable with there electronics .I love the way you explain things ..thank you Greg Whayman
LikeLike
hello mate can you give me some part numbers or sizes on what type and strength magnets you used please
LikeLike
Dimensions are 12x3x3 mm. Polarization trough the 12mm side. I have no part number, you’ll just have to browse some for neomybium magnets on Aliexpress.
LikeLike
Dit is weer een mooie video met duidelijke uitleg, bedankt!
LikeLike